If you have a printer, you can 3D print T-Deck mounts for wall or peg board, allowing you to leave your devices upright, out of the way, and vertical when not in use.
Your cluster will work best if you leave devices running 24/7. Most antennas work best with a ground plane, meaning the antenna should be vertical in relation to the ground.
The printable files are listed below. Feel free to download and print them.
| Mount Type | Description | Files |
T-Deck Plus | This 3D printable wall mount holds your T-Deck plus against a peg board or wall, as shown on the left. Underneath is a hole that lines up with the USB-C charging port, so you can leave the T-Deck+ charging/running while upright in this mount. | T-Deck Plus Wall Mount – STL T-Deck Plus Wall Mount – 3MF |
T-Deck Custom | This 3D printable wall mount holds your custom T-Deck against a peg board or wall, as shown on the left. Underneath is a hole that lines up with the USB-C charging port, so you can leave the T-Deck+ charging/running while upright in this mount. | T-Deck Wall Mount – STL T-Deck Wall Mount – 3MF |
Rokland T-Deck Complete | This 3D printable wall mount holds your Rokland T-Deck cmplete against a peg board or wall, as shown on the left. Underneath is a hole that lines up with the USB-C charging port, so you can leave the T-Deck charging/running while upright in this mount. | T-Deck Wall Mount – STL T-Deck Wall Mount – 3MF |