Minimal Assembly (No Soldering)
The simplest way to get started is by purchasing a couple of T-Deck+ communicators and optionally a T-Beam Supreme.
Follow our simple secure comms cluster setup guide.
More Advanced, Fully Customizable
If you have (or have access to) basic soldering equipment and a 3D printer, you can build communicators and nodes yourself. Be sure you only use the proper components (listed in the instructions).
Note: ChatterBox firmware is a licensed product, and you may be required to purchase a license if you go this route. Licenses are inexpensive and help to support this site and further development of ChatterBox.
- T-Deck Plus Mesh Communicator
- T-Deck Mesh Communicator
- T-Beam Mesh Node
- T3S3 Mesh Node
- Solar Mesh Node
- Proximity Sensing Node
- Heltec Vision E290 Node
- Low Power SAMD51 Node
This option is not recommended if you are uncomfortable working with electronics. However, if you like soldering and 3d printing, you may have fun with this.